B Appliance Switching On/Off; Auto Mode (Automatic); Cooling Mode (Cool); Turbo Cooling Mode - Olimpia splendid DOLCECLIMA AIR PRO Instrucciones Para El Uso Y El Mantenimiento

3.4.b Appliance switching on/off

a. to start the appliance, press the key "ON/OFF" on the remote control or the key
b. A beep warns that the appliance is in operation and the flap (23) raises.
c. the icon switches on on the control panel.
d. appears on its display
e. in case of prolonged stop of the appliance, it must be reset by removing the plug from the power socket,
wait 5÷10 seconds and then reinsert it; a beep signals that the appliance is ready for use.

3.5 AUTO MODE (Automatic)

a. When this mode is selected, the appliance automatically activates the CoolinG, HeatinG (only for
version with heat pump) or fan functions depending on the environment temperature and on the set one.
the environment temperature is continuously checked to obtain an optimal comfort in the air conditioned
room.
b. this mode can be selected by pressing the key "MODE" once or more (on the remote control or on the
control panel) until when the specific icon ECO and blue Air is shown on the display of the control panel
and/or when the icon Auto appears on the remote control display.
c. it is not possible to select the fan speed in AUTO mode.

3.6 COOLING MODE (COOL)

a. When this mode is selected, the appliance dehumidifies and cools the environment.
this mode can be selected by pressing the key "MODE" once or more (on the remote control or on the
control panel) until when the specific icon
b. in this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key "FAN" on the remote control or the key
the fan speed is displayed as indicated in paragraphs "3.1" (point SW7) and "3.2" (point B3).
c. the temperature set-point is included between 17°C and 30°C (from 62°f and 86°f) with 1°C variations
and it can be set using the keys +/- on the control panel or with the keys ▲ ▼ on the remote control.
d. after a certain time (maximum three minutes) after the activation of the operation mode, the compressor
activates and the appliance starts delivering cold air.

3.7 TURbO COOLING MODE

• This function can be activated only from the control panel of the appliance.
a. this mode can be selected by pressing key "MODE" once or more on the control panel until the icons
and "Turbo" appear on the display.
b. the function sets the appliance directly to cooling mode with a temperature of 17°C and maximum speed
of the fan in order to reach the set temperature more quickly.
EN - 18
appears on its display.
appears on the display.
on the control panel.
on the control panel.