Care & Maintenance - fortress I Serie Instrucciones De Instalación

CARE & MAINTENANCE
CLEANING YOUR DECK BOARDS
What you will need
Soap Water
STEP 1: Apply soapy water to your deck with a sponge.
STEP 2: Sweep the liquid over your deck using the hard-bristled
broom, making sure to remove all dirt and residue from
the gaps between the decking boards. Sweeping in the
direction of the grain is best.
STEP 3: If residue and/or dirt are still evident on your deck, a
high pressure hose is very effective in removing stubborn
and unavoidable organic waste.
NOTE: Use a high pressure hose with a wide fan tip at pressures
under 1500 psi. Remember to keep the hose at least 12" or
300mm away from the surface when spraying.
For best results, high pressure hose your deck while
simultaneously brushing it with a hard-bristled broom and soapy
water. We recommend pressure washing your deck once a month
to keep it looking clean and cared for.
Please exercise extreme caution as pressure washing can damage
your I-Series deck if done incorrectly. If you notice any
changes to the surface of your profile, stop immediately
and contact Fortress�
*DO NOT use standard composite deck cleaners on I-Series.
Bucket Sponge
DECKING INSTALLATION : I-SERIES
Hard-Bristled High Pressure Hose
Broom With Fan Tip
15