Fastening Points; Side View - fortress I Serie Instrucciones De Instalación

Fastening Points Using A Single Grooved Edge Board
The I-Series Starter Board profile can be used to frame your
deck. It is only grooved on one side and has a finished square
edge on the other side�
• This perimeter board should be top-fixed using color
matching composite deck screws.
• The screws should be located 1-1/4" [32mm] away
from any edge of the I-Series profile.
• Use HULK hidden fasteners between decking profiles.
As shown in Fig� 2, 3 & 4�
Note:
DO NOT overdrive the screw into the decking surface.
I-Series decking is not solid and has cavities that can be
compromised if your drill torque setting is too high.
Fig. 2
Grooved Board
Fig. 3
Grooved Board

SIDE VIEW

Top Fixing Screw
Starter Board
HULK Hidden
Fastener
SIDE VIEW
Top Fixing Screw
Square Board
DECKING INSTALLATION : I-SERIES
TOP VIEW
Grooved Board
Starter Board
TOP VIEW
Grooved Board
Square Board
11