Storage And Recycling - Hupfer OTA/47-36 Manual De Instrucciones

Chapter4
Page20
4.4

Storage and Recycling

Temporary storage must take place in a dry and frost-free environment. The tray dispenser must be kept
covered with a suitable covering material to be protected against dust ingress.
The tray dispenser kept in the storage location must be checked for damages and corrosion every 6 months.
NOTE
Before the appliance is taken back into operation, it must be clean and dry.
If the tray dispenser is required to be recycled, all the heating devices (if available) must be removed safely
and completely, the recyclable materials must be separated properly and disposed in an environmentally
compatible manner according to the Waste Disposal Regulations. In any case, the local bodies responsible
for disposal are to be involved for this purpose.
Tray dispenser
OTA/47–36 | OTA/53–37 | OTA/58-33 | OTA/53–37 S | OTA/U-BW | OTA-E/BA-4xGN | TAG-1/53-37 | TA-2/53-37 | EBS-T/53-37
Transport, Commissioning, Assembly and Decommissioning
Condensed water formation
Ensure that there is sufficient ventilation and no large temperature fluctuations
in the storage location to avoid condensed water formation.
Storage and Recycling
4330041_A2