Items Supplied; Proper Use; Technical Data; Before Using The Equipment - EINHELL TC-LD 25 Manual De Instrucciones Original

2.2 Items supplied

Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Laser measuring tool
•
Bag
•
Original operating instructions
•
Battery not included

3. Proper use

The laser is designed for measuring distances,
areas and volumes.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_SA_TC_LD_25_SPK8.indb 16 Anl_SA_TC_LD_25_SPK8.indb 16
GB

4. Technical data

See warranty card of your country.
Limit the operating time.
All stages of the operating cycle must be conside-
red (for example, times in which the electric tools
are switched off and times in which the tool is
switched on but operates without load).

5. Before using the equipment

Inserting/changing batteries (Fig. 2)
•
Switch off the equipment.
•
Remove the battery compartment cover (6)
by pressing in the fastener (a) and flipping up
the battery compartment cover.
•
Insert the batteries (b), ensuring that you fit
them the right way round.
•
Fit the battery compartment cover back on,
making sure that the fastener snaps into
place.

6. Operation

Important!
The measuring distance and measuring accuracy
can be aff ected by ambient conditions such as
sunlight or poor refl ection and this can have an
adverse eff ect on the measurement result.
6.1 Description of the function buttons
(Fig. 3)
A ON / OFF / Measuring button
B Measurement options button / Selection of
the reference point for distance measurement
6.2 Switching the laser on/off
•
To switch on the laser, press the ON / OFF /
Measuring button (A) and keep it pressed for
a short time.
•
To switch off the laser, press the ON / OFF /
Measuring button (A) and keep it pressed for
about 1 second.
- 16 -
27.06.2017 13:33:13 27.06.2017 13:33:13