Nozzle Maintenance; Compliance Information; Fcc Compliance - The Fountainhead Group Pump Zero 190571 Manual De Uso Y Cuidado

Atomizador eléctrico a batería
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SERVICING INSTRUCTIONS CONTINUED

Nozzle Maintenance

WARNING: Prior to performing maintenance always depressurize Sprayer by pressing the Power But-
ton to turn power OFF and then operating the Pressure Release Valve until all air pressure in the Tank
has been released.
1. If Nozzle clogs, remove and disassemble the Nozzle assembly.
2. Clean the openings of any obstructions or residue. Do not use sharp tools that could scratch or
damage the Nozzle as spray pattern could be affected.
PumpZero Pump Maintenance
The Pump Zerp Pump does not require regular maintenance beyond charging and normal cleaning.
See Charging the Pump Internal Battery and Cleaning & Storage.

FCC Compliance:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Canada IC:
CAN ICES-3 (B)/NMB-3(B)

COMPLIANCE INFORMATION

Page 8
Tabla de contenido
loading

Tabla de contenido