THOMSON TT400 CD Manual De Instrucciones página 19

inserted.
3. Select the track to be encoded and start playing the record.
4. Press the Record button to start sync encoding. The following will be displayed depending on
what media you are using to store the music.
Encoding to USB
5. To stop encoding press the STOP/TIMER Button (15).
Note: To ensure the encoding is successful, remove the USB a few seconds after pressing the
STOP Button.
6. To start recording again, press the RECORD Button (9) again and follow step
2 above.
PLEASE NOTE: If you want to encode an entire side of a record and have separated MP3 files for each
track, you must manually press the STOP/TIMER Button (15) at the end of each track and then press the
RECORD Button (9) again to start recording the next track. If you do not manually Stop and Start the
recording process after each track, you will end up with one large MP3 file that will have all the songs
from the side of the record playing one after the other.
TS BUTTON (Track separation, press it to split next song)
When recording form vinyl to USB, press TS button once at the end of song. Then, it will create a
new file to another song for record.
If the USB capacity more than 4GB, the record time may delay about 6-10 seconds for 2
To prevent incomplete song recording, lift up "Tone Arm" while the USB drive under checking. Lift
down "Tone Arm" when USB ready to record.
COMPACT DISC/MP3 OPERATION
LOADING AND UNLOADING COMPACT DISCS
Select CD/MP3 with the Function button (21) on the unit to choose the CD/MP3 mode.
Open the disc compartment by pressing the CD Open Button (20).
LISTENING TO COMPACT DISC AND MP3 DISC (CD)
Select CD mode by Function button (21):
A) In the CD mode
This unit can read CD, CD-R, CD-RW.
B ) In the MP3 mode
It can read MP3 format and several albums.
Listening to CD
1. Select CD mode by Function button (21)
2. Press the PLAY/PAUSE button on the unit once to start playing the CD from the first track.
3. Press the PLAY /PAUSE button again to playing the CD "pause" indicator will appear on the
display (the track number is flash).
4. To stop playback, press the "Stop" button.
TRACK SKIP
Selecting a different track during CD Play
1. Press the SKIP (REW. or F.F.) button on the unit.
The required track number appears on the display.
2. Press the PLAY / PAUSE button on the unit. Starting again with the track that is currently
selected.
Encoding to USB
nd
song.
7