HoMedics Cool Mist Guia De Inicio Rapido

Cool Mist Oscillating Ultrasonic Humidifier – Quick Start Guide
How to Fill
CAUTION: unit with water, turn the power off and unplug the unit from the outlet.
Before filling
NOTE: Always use two hands to carry the water tank.
Once the tank is full, plug in the humidifier and turn it on by turning the Power/Mist Knob clockwise.
Adjust the mist as desired. To turn the humidifier off, turn the Power/Mist Knob counterclockwise until
you hear a click.
1. Remove the oscillation nozzle. To remove the nozzle, turn the
ring on the bottom of the nozzle clockwise until the Locator
icons on the head, ring and base all line up and are aligned
with the UNLOCK ( ) position. Lift up to remove the nozzle
and set aside. (Fig. 4)
2. Raise the flip-up handle on the water tank and remove the tank
from the humidifier base by lifting it straight up and away
(Fig 5.)
3. Turn the tank upside down – remove the tank cap by turning it
counter-clockwise. (Fig. 6)
4. Fill the water tank with clean, cool (not cold) water. We
recommend using distilled water if you live in a hard water
area (Fig. 7)
If desired, add the included demineralization cartridge
directly into the tank
5. Replace the tank cap by turning clockwise until tight. (Fig. 8)
6. Install the tank straight down back on the base of the unit.
Make sure the tank is firmly seated. (Fig. 9)
7. Place the oscillating nozzle back on the unit making sure that
the locator icons on the head and ring are aligned with the
locator icon ( ) on the base above the UNLOCK (
(Fig. 10a)
8. Lock into place by turning the ring counter-clockwise until
the Locator icon ( ) is aligned with the LOCK (
(Figure. 10b)
NOTE: It is normal to have a small amount of water in the base
during and after use.
) icon.
) position.
QS-UHEOC1A