OPTIONAL SIDE KIT
Use the #10 CB-SS676 screws and washer CB-203-1198 provided to attach the side glass panels.
[216-1077]
Side kit Hardware Bag
[203-1198]
9 [SS676]
(9) Washer
#10 x 1/2" Sheet metal screw
OPTIONAL SELECTABLE NIGHT LIGHT
Note: The Night Light is preinstalled to a default color setting of 2700K. If 2700K is your desired color temperature, proceed to step 2. If
4000K is your desired color temperature you must complete step 1.
1. To select the 4000K color temperature you must disconnect the power supply from the 2700K wires located on the inside of the
vanity. Once located, disconnect the wires labeled 2700K and connect the wires labeled 4000K.
2. Plug in the power supply into the wall and test.
3. Neatly restrain wires to avoid interference with drawer or drawer slides.
Note: When installing multiple night lights, a power strip can be used.
2
1
Part no. 209-1232-E-Cartesian, Profiles H2 rev. 05/16/18
Cartesian™ Vanity, Profiles™ Vanity
© 2016 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
13
Installation instructions
Capítulos
