GLASS DRAWER FRONT
If you are installing VAELECTRIC, see separate instructions before installing the glass drawer fronts.
Install the countertop and plumbing before installing the glass drawer fronts.
1. The drawer front is first hung from two keyholes on each side of the drawer box. Install 2 #8-32 x 1/2" screws (203-1219) WITHOUT
washers on the bottom of each bracket in the drawer front (Fig. 1).
2. Hang the drawer front on the drawer box and install the remaining screws WITH washers into the two remaining threads in the
drawer front bracket (Fig. 2). Tighten the screws tightly after the drawer front is level and even with the side kits.
3. Snap the screw covers over the screws by squeezing gently at "Robern".
1
2
© 2016 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
17
[216-1074]
Drawer front Hardware Bag
[203-1219]
(4) #8-32 x 1/2" Screw
[203-1198]
[211-1095]
(2) Screw cover
(4) Washer
3
Part no. 209-1232-E-Cartesian, Profiles H2 rev. 05/16/18
Cartesian™ Vanity, Profiles™ Vanity
Capítulos
