Nice ANATEL Guarita IP Instrucciones Y Advertencias Para La Instalación Y El Uso página 130

11.5 A05 - DESP. PORT (WAKE UP DOORMAN)
To change the wake-up doorman setting, access the "A05 - Desp.
Port. (Wake up doorman)" option, image 11.5.a, set the desired
parameters and press ENTER again to save the programming.
The "A05 - Desp. Port. (Wake up doorman)" option selects the
delay time to the relay activation of the wake-up doorman (Relay
time) for integration with remote or local alarm centers (through
dialers), sirens or lamps (use external relay of the Botoeira 7
Teclas module). The time to activate the relay signal may vary from
1 to 30 seconds, after the fifth and last time out notice, to confirm
the presence through the Guarita IP "RESET" key, fingerprint
validation (or available command remotely).
To not generate a "Desperta Porteiro N.A. (Wake up doorman
N.A.)" (N.A. = not answered) event, press the RESET key or
validate the doorman's fingerprint during the time out message
display, image 11.5.b.
The alert also can be defined as "Silencioso (Silent)" (selection
SIM - YES / NÃO - NO), suppressing the audible alert in the SIM -
YES setting, image 11.5.c.
The "Reset relé (Relay reset)" option, image 11.5.c, can help, for
example, in cases where the Guarita IP is not monitored by an
operator, resetting automatically after the defined time out to this
parameter (from 1 to 255s).
When automatic reset occurs, the display of the Desperta Porteiro (Wake up doorman)
message will be canceled and the auxiliary relay (of the Buttons Module) will return back to
the wait status.
Enabling the "Disp. Portaria (Wake up doorman)" field, will be possible identify a fingerprint as doorman's
fingerprint, according the instructions described in the item 10.6 - Desp Port.
EXAMPLE:
- Note the example, image 11.5.d, where was set the logical
output activation = 15 sec., in the "não silencioso (not silent)" mode
and "sem reset automático (without automatic reset)".
11.6 A06 - BAUDRATE
BAUDRATE RS232(PC)
Baud rate setting through for the serial port / USB Device
connection, factory standard = 19.200 bps. In long distances
between the Guarita IP and PC, it is suggested decrease the rate
to 9.600 bps, and to connections with USB converters, 115.200
bps can be used, image 11.6.a.
Image 11.5.a
Image 11.5.b
15s
NAO
NAO
Disp.Portaria:
SIM
Image 11.5.c
Disp.Portaria:
SIM
Image 11.5.d
Image 11.6.a
English - 130
Português -
130