Customer Service - Klein Tools TONEcube Manual De Instrucciones

ENGLISH
pROBEplus BATTERy REpLAcEMENT
1. Remove screw at the speaker end on the rear of the PROBEplus
with a #1 Phillips head screwdriver. Remove battery door.
2. Recycle exhausted battery.
3. Acquire a 9 volt alkaline battery (IEC 6LR61, ANSI/NEDA 1640A).
Connect battery cable to new battery observing polarity and place
4.
into battery compartment.
Replace battery door and screw, taking care not to over-tighten it.
5.
WARRANTy
www.kleintools.com/warranty
cLEANING
Turn instrument off and disconnect test leads. Clean the instrument by
using a damp cloth. Do not use abrasive cleaners or solvents.
STORAGE
Remove the batteries when instrument is not in use for a prolonged period
of time. Do not expose to high temperatures or humidity. After a period
of storage in extreme conditions exceeding the limits mentioned in the
Specifications section, allow the instrument to return to normal operating
conditions before using it.
DISpOSAL / REcycLE
caution: This symbol indicates that equipment and its
accessories shall be subject to a separate collection and
correct disposal.

cUSTOMER SERVIcE

KLEIN TOOLS, INc.
450 Bond Street
Lincolnshire, IL 60069
1-800-553-4676
www.kleintools.com
8
Manual de
instrucciones
TONEcube y
PROBEplus
ENGLISH
VDV500-051 y
VDV500-060
ESpAÑOL
Español pg. 9
Português pg. 17
Français p. 25
www.kleintools.com