Inserting And Changing The Battery - Leica GEOVID HD-B Instrucciones

INSERTING AND CHANGING THE BATTERY

The Leica Geovid HD-B draws its power supply from a
3 Volt lithium button cell (type CR2).
1. Open the cover (11) over the battery compartment
(12) by turning it anticlockwise, e.g. with a coin.
2. Insert the battery so that the positive contact goes
in first (as shown by the markings in the battery
compartment).
3. Close the cover again by turning it clockwise.
32
Notes:
• Cold conditions impair the battery performance.
Therefore, at low temperatures the binoculars
should be kept as close to the body as possible and
a new battery should be fitted.
• If the binoculars are not going to be used for a long
time, the battery should be removed.
• Batteries should be stored in a cool dry place.
Attention:
• Batteries should never be put in a fire, heated,
recharged, taken to pieces or broken apart.
• Used batteries may not be disposed of as normal,
household waste as they contain toxic materials
that are harmful to the environment.
• To ensure that they are properly recycled, they
should be returned to the dealer or disposed of as
special waste (at a collection point).