Indicators (Ref. To Fig. 1) - HUEGLI TECH HT GC310 Manual De Instrucciones

Button
START
Ref. 1b
STOP
Ref. 1b

3.2 Indicators (ref. to fig. 1)

Ref. 2b
Ref. 2b
Ref. 2b
Ref. 2b
Ref. 2b
Function
In MAN mode it is used to start-up the generator.
In AUTO mode it enables/disables the TEST status. Used together with the STOP
button at the start-up, it lets you access to Gen-set special functions.
Used to stop the engine. In AUTO, TEST or REMOTE START mode it also
activates a lockout. Pressed with the board in OFF/RESET mode it runs the LAMP
TEST on all the luminous indicators. Used together with the START
the start-up, it allows you to access to Gen-set special functions.
LED OFF LED steady ON

Signalling Function

Operation mode set to OFF/RESET
PROGRAM

Operation mode set to PROGRAMMING
OFF/RESET

Different operation mode.

Operation mode set to MANUAL
MANUAL

Different operation mode.

Operation mode set to AUTO
AUTO Flashing 50% - Operation mode set to TEST

TEST
Flashing 90% ON - Operation mode set to REMOTE START-UP

Different operation mode.

The display shows "STATUS" mode pages.
STATUS

The display shows "PROGRAM" or other mode.

The display shows "MEASURES" mode pages.
HT GC310/HT GC350 - Flashing 50% - Engine measures window
enabled.

MEASURES
HT GC500 - Flashing 25% ON - Parallel measures window enabled.
HT GC500 - Flashing 75% ON - Engine measures window enabled.

The display shows "PROGRAM" or other mode.
LED flashing
 
User's Manual HT GC310/HT GC350/HT GC500
button at
7