Display Area Layout (Ref. To Fig. 3); Top Status Bar (Ref. To Fig. 4); Display Mode; Programming - HUEGLI TECH HT GC310 Manual De Instrucciones

3.3.2

Display area layout (ref. to fig. 3)

KEY:
1 - Status bar
2 - Data Area
3.3.3

Top status bar (ref. to fig. 4)

Top status bar shows navigation, time and/or some status information.
KEY:
1a – Mode identifier
1b – Page identifier
1c – Page title
1d – Time
2 – System status
The current mode is shown in the relevant field of the top status bar (1a).
The mode identifier (1a), and the page identifier (1b) identify and refer to the page so there is no chance of error.
System status (2) shows part of page S.01 information (status information), helpful for the operator as it can be viewed even
when accessing other pages or display mode.
When in some pages, pressing the EXIT/SHIFT
System Status message. If the message is unavailable, the bar is cleared and restored when the button is released.

3.4 Display mode

3.4.1 Programming (P.xx)
WARNING: assigning incorrect values to one or more parameters can cause malfunctions, damage to
things and/or injury to people. The parameters must only be changed by qualified personnel. Parameters can
be protected by password (see par. Access codes).
This mode lets you display and change the programming parameters.
Each programming parameter has a 3-digit numeric code (ex. P.101) to identify the variables regardless of the language
used.
The first line under the top status bar identifies the current menu with the menu number and the relevant text.
E.01 ENGINE
1
Oil pressure(bar):
2
Cool. Temp.(°C):
Speed (rpm):
Fig. 3 - Display areas
E.02 ENGINE
1a
Fig. 4 - Top status bar
button replaces the top status bar - as long as the button is held - with a
18:23
XX
XX
XX
2
18:23
1c
1b
User's Manual HT GC310/HT GC350/HT GC500
1d
11