Remote Controller (Bottom Panel); Remote Controller (Lcd) - Teac Tascam CD-X1500 Manual Del Usuario

English

2-4. Remote Controller (Bottom Panel)

z Remote Connector
Connect this to the REMOTE connector on the rear
panel of the main unit.
WARNING
... DO NOT use any cable except the cable
supplied with the CD-X1500.

2-5. Remote Controller (LCD)

x M indicator
If there is track memory data for the current
selected track in the current selected memory bank,
this indicator lights.
c TRACK indicator
v REMAIN indicator
When the time mode is set to remain time mode,
this indicator lights.
10
TASCAM CD-X1500 DUAL CD PLAYER
2. Functions and Controls
... Connect the cable to the CD-X1500
shown on the illustration on the rear
panel. If you connect the cable in any
other way, you may damage the CD-
X1500.
b SINGLE indicator
When the play mode is set to single play, this
indicator lights.
n PGM indicator
When the play mode is set to programmed play,
this indicator lights.
m Time display
This section is used to show track number, time
values or messages.