Stalgast 803020 Instrucciones De Uso página 40

PROBLEM
The appliance does
not wash dishes
Stains on the forks,
glasses and dishes
Dishwasher does
not rinse
Solenoid valve
leaking
The water pressure
in the appliance is
too low
The pump does not
pump out water
8. MAINTENANCE
Before starting any maintenance work, disconnect the appliance from the power supply.
Daily maintenance involves removing objects from the chamber and washing them with a cloth dampened in
water with a dish detergent and then wiping them off with a dry cloth. Washing under running water as well as
using a pressure washer for this purpose is prohibited.
In the case of intense use, we recommend that you clean the filters every 30-40 wash cycles in order to ensure
the proper functioning of the appliance. To do this, partially drain the tank of water.
Remove the filters, making sure no fatty deposits and left-over food falls into the openings under the filters. Clean
the filters of food residue and sediment and then rinse thoroughly. Do not use sharp tools or sharp edges to clean
the filters. Make sure to also remove limescale, as this prevents the build-up of a layer on the surface of the filter.
The surfaces of the filters should be cleaned thoroughly with a damp cloth and neutral (non- aggressive)
detergents with no chlorine content and agents that do not cause corrosion and mechanical damage to stainless
steel surfaces.
In order to prevent the formation of corrosion spots on the stainless steel, avoid using harsh detergents
containing chlorine and agents that cause corrosion or mechanical damage to the stainless steel surfaces. For
CAUSE
Broken washing pump
Low pump pressure
Water temperature is too low
Wrong detergent
Arms covered with limescale or foreign
bodies present
Empty detergent container
Malfunction in the water treatment unit
Improper arrangement of utensils
The temperature of the rinsing water is
too high
Incorrect water pressure
Water hardness too high
Cleaning agent did not work due to the
dirty water in the machine
Dishes drying improperly
Wrong rinse aid
Dirty water inlet filter
Low water pressure
Faulty rinsing pump
Contamination of the solenoid valve
Contaminated water inlet filter or
solenoid valve
Low water pressure in the water supply
Pump clogged
Faulty pump
- 42 -
SOLUTION
Call for service
Clean the pump filter
Correct the water heating time
Contact manufacturer
Clean the arms and remove foreign
bodies
Refill container
Notify service
Arrange utensils in accordance
with instructions
Setting a suitable temperature
Clean filters
Check water hardness
Change water in the appliance
Change water in the appliance
Contact manufacturer
Clean the filter
Clean the pump filter and solenoid
valve
Call for service
Call for service Note: When
installing the appliance, foreign
material or undesirable chemicals
from the water supply could have
been trapped in the solenoid valve.
Clean the water inlet filter or
solenoid valve
Contact a plumber
Contact service