Idiomas disponibles
Idiomas disponibles
Install The Oil Level Indicator
1. Place the seal on the end of the indicator tube and press the tube into the fitting in the oil pan. See Figure 9.
2. Bolt the indicator tube assemble to the exhaust manifold bolt hole.
3. Insert the indicator into the indicator tube.
TUBE ASSEMBLY
EXHAUST MANIFOLD
(NOT INCLUDED)
OIL PAN ASSEMBLY
Install The Engine Lift Hooks
1. Install the engine lift hooks to the top holes of the cylinder heads
on the rear corner of the passenger side and the front corner
of the driver side of the engine.
2. Torque the bolts of the engine lift hooks to 35 ft-lbs.
See Figure 10.
Install A Pipe Plug Or A Temperature Sender In The Cylinder Heads
1. Apply thread sealer to the threads of the pipe plugs.
2. Install the pipe plugs into the coolant holes on the side of the heads. Torque
the plugs to 15 ft-lbs. See Figure 11.
3. A temperature sender can be installed in one of the coolant holes in the
heads or in one of the coolant holes in the intake manifold instead of a pipe
plug.
NOTE: The remaining instructions are for the Deluxe Engine, but Base
Engine buyers should review the instructions.
502/502 Big Block Chevrolet Engine Pkg.
TITLE
FRONT
STUD (NOT INCLUDED)
NUT (NOT INCLUDED
FIGURE 9
REV 16JA15
INDICATOR ASSEMBLY
OIL PAN ASSEMBLY
VERTICAL
BOLT
FRONT
FIGURE 10
CYLINDER HEAD
ASSEMBLY
12368083
PART NO.
TUBE ASSEMBLY
SEAL
FRONT
VIEW A
BRACKET
CYLINDER HEAD
ASSEMBLY
PLUG
FRONT
FIGURE 11
6
63
SHEET
OF
