Fcc Issues - Powervar 420VA Guía Del Utilizador

®
POWERVAR - SECURITY ONE UNINTERRUPTIBLE POWER MANAGER
Ø
Do not open or mutilate batteries. Doing so may release electrolyte or other toxic substances,
which may be harmful to the skin, eyes, or the environment.
A battery can present a risk of electric shock and high short circuit current. The following
precautions should be observed when working with batteries:
Ø
Remove watches, rings, or any other metal jewelry or objects which may make contact with the
battery.
Ø
Use tools with insulated handles.
Ø
A certified detachable power supply cord is to be used with this equipment. For the 420, 600,
and 800 VA models, a type not lighter than SJT 18AWG should be used. For the 1100 and 1440
VA models, a type not lighter than SJT 16AWG should be used. (Also applies to Ground
Guard®, Hospital Grade, and Medical versions of this UPM product.) The 2.2 kVA and 3.0 kVA
120V models come with an attached line cord.
3.0 – FCC ISSUES
Attention:
This equipment has been tested and found to comply with the limits for a Class A digital devices (Class B
compliance optional), pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in both residential and commercial environments.
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio and/or television reception, which can be determined by turning the UPM
equipment on and off, the user is encouraged to try to correct the interference by one or more of the
following measures:
Ø
Reorient or relocate the receiving antenna.
Ø
Increase the separation between the UPM and the receiver.
Ø
Connect the UPM into an outlet on a circuit that is different from that to which the receiver is
connected.
Ø
Consult the dealer or an experienced radio/TV technician for assistance.
5