Sunny Health & Fitness SF-T7705 Manual Del Usuario página 28

E06: Motor Abnormality
E08: Control
Abnormality
E10: Motor Abnormality
NOTE: If you are unable to resolve an issue using the troubleshooting guide above, please
contact Customer Service at [email protected]
The motor wire is not
connected, or the motor is
damaged.
Board The control board is not
connected.
The motor is damaged, or
a moving
treadmill is
therefore the
unable to rotate properly.
Check motor wires to see if
the motor is connected. If the
wire has been punctured or
damaged, you will need to
replace it. If the problem is not
rectified, you may need to
replace the motor.
Check the upper and middle
wires to see if the control
board is connected. If the wire
has
damaged, you will need to
replace it. If the problem is
not rectified, you may need to
replace the control board.
Inspect moving parts of the
part of the treadmill to ensure that they
stuck and are operating correctly.
motor is Replace
necessary.
27
been punctured
the motor
Version 1.5
or
if