Control Panel - Astralpool OPTIMA PLUS Manual De Instalación

Control Panel

Access to the programming menu
When pressed during the pump operation phase, it cyclically displays the programmed values on the display;
When pressed at the same time as the
selected operating mode. During programming it carries out an "enter" function, meaning that it confirms entry
to the various menu levels and modifications within the same.
Starts and stops the pump. In the event of a level alarm (alarm function only), flow alarm, active memory alarm
and watchdog com alarm it deactivates the signal on the display.
Used to "exit" the various menu levels. Before definitively exiting the programming phase, you will be asked if you
wish to save any changes.
Access to the pump calibration menu. If in Off mode, the calibration menu is not activated.
Used to run upwards through the menu or increase the numerical values to be changed. Can be used to start
dosage in Batch mode.
Used to run downwards through the menu, or decrease the numerical values to be changed.
Flashing green LED during dosage
Red LED that lights up in various alarm situations
EM00136408
OPTIMA PLUS
a keys, it increases or lowers a value dependent on the
rev. 1.0
1