Astralpool OPTIMA PLUS Manual De Instalación página 11

Paragraph 10 - Statistics
Programming
PROG
-
-
Statistic
Hours 10
Statistic
Strokes 1000
-
Statistic
Q.ty(L) 100
-
Statistic
Power 10
-
Statistic
Reset
ESC
Statistic
Hours - 10
Paragraph 11 - Password
Programming
PROG
-
-
Password
****
Password
0000
-
Paragraph 12 – Flow Alarm
Programming
PROG
-
-
Alarms Alarm Flow
Flow Off
Off
Alarm Flow
On
-
Alarm Flow - On
Signals
Alarms
Flow
EM00136408
-
Statistic Reset
+
NO
-
+
-
+
-
-
+
6
ESC
Off
-
The main menu displays the pump operation times. By
pressing the key you can access other statistics:
- Strokes = number of strokes made by the pump
- Q.ty (L) = quantity dosed by the pump in litres; this figure
is calculated on the basis of the memorised cc/stroke value
- Power = number of pump starts
- Reset = use the
otherwise (NO), then confirm by pressing the
Pressing the
By entering the password, you can enter the programming
menu and see all the set values. The password will be
requested whenever you seek to modify them.
The flashing line indicates the number than can be
modified. Use the
9), and the key to select the number to be modified.
Confirm by pressing the
(default), the password is eliminated.
This makes it possible to activate (deactivate) the flow
sensor.
When activated (On), press the
request for the number of signals that the pump waits for
before an alarm is triggered. The number flashes when you
press the key, and you can then use the
keys to set the value. Confirm by pressing the
Press to return to the main menu
rev. 1.0
Operation
to reset the counters (YES) or
key will take you back to the main menu.
Operation
key to select the number (from 1 to
key. By setting "0000"
Operation
key.
key to access the
key.
9