Homologación Atex - Siemens SIMATIC S7-1500 Manual De Sistema

Datos técnicos
15.1 Normas y homologaciones
cULus HAZ. LOC. - Homologación
Underwriters Laboratories Inc. según
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
● ANSI/ISA 12.12.01
● CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
Installation Instructions for cULus haz.loc.
● WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is
known to be non-hazardous.
● WARNING - Explosion Hazard - Substitution of components may impair suitability for
Class I, Division 2 or Zone 2.
● This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I, Zone
2, Group IIC; or non-hazardous locations.
● These products need to be connected by means of the front connector Cat. No.
6ES7592-1AM00-0XB0
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING
PROPERTIES OF MATERIALS USED IN THE RELAYS.
Homologación FM
Factory Mutual Research (FM) según
● Approval Standard Class Number 3611, 3600, 3810
● ANSI/ISA 82.02.01 (IEC 61010-1)
● CSA C22.2 No. 213
● CSA 22.2 No. 1010.1
APPROVED for use in Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
Homologación ATEX
Según EN 60079-15 (Electrical apparatus for potentially explosive atmospheres; Type of
protection "n") y EN 60079-0 (Electrical apparatus for potentially explosive gas atmospheres
- Part 0: General Requirements)
216
Sistema de automatización
Manual de sistema, 12/2014, A5E03461184-AC