Hints On The Manual; Handling; Transport; Storage - Pfannenberg DTS Serie Instrucciones De La Instalación Y Del Uso

Contents
1 Hints on the manual ................................................. 10
2 Handling ..................................................................... 10
2.1 Transport ...................................................................... 10
2.2 Storage ......................................................................... 10
2.3 Unpacking ..................................................................... 10
3 Scope of delivery and options ................................ 11
3.1 Scope of delivery ......................................................... 11
3.2 Optionen ....................................................................... 11
4 General Information ................................................. 11
5 ID Plate and Technical Data ...................................... 11
6 Safety .......................................................................... 11
7 Function ...................................................................... 11
7.1 Principles of function .................................................... 11
7.2 Condensate .................................................................. 11
8 Installation ................................................................. 12
8.1 General ........................................................................ 12
8.2 Installation of built-in cooling unit DTI
8.3 Installation of bolt-on and built-in cooling unit
DTS/DTFI ...................................................................... 12
8.4 Power connection ........................................................ 13
9 Operationg Conditions ............................................ 13
10 Putting into operation and function ....................... 13
10.1 General remarks ........................................................... 13
10.2 Indicator elements ......................................................... 13
10.3 Test mode / Start-up ...................................................... 13
10.4 Unit characteristics ...................................................... 14
10.5 Door contact ................................................................. 14
10.6 Centralised fault indication ............................................ 14
10.7 Setting prossibilities ...................................................... 14
11 Cleaning and Maintenance ...................................... 14
11.1 Cleaning ........................................................................ 14
11.2 Maintenace ................................................................... 14
12 Stopping ..................................................................... 14
13 What to do if ............................................................... 15
13.1 General errors .............................................................. 15
13.2 Fault diagnosis ............................................................. 15
13.3 Pfannenberg units with standard controller
14 Warranty Conditions ................................................ 16
Read this manual completely and carefully
before installing the unit.
This manual is an integral part of the scope of
delivery and must be kept until the unit is
disposed of.
10
1

Hints on the manual

This handbook contains instructions for the installation and
operation of
• Door and side-mounted, built-in Cooling Units,
Series DTI/DTFI
• Door and side-mounted, bolt-on Cooling Units,
Series DTS
Hint
The technical specifications for each machine along with additio-
nal information on assembly, connections and operation are
contained in a separate sheet.
In this manual, safety recommendations and other information are
structured as follows:
............................ 12
Hint
A hint contains additional information on the action or instruction
described.
2

Handling

2.1
• Lift cooling unit by the casing only.
• Transport the cooling unit only in condition of usage.
Failure to observe these instructions will render the warranty
provisions null and void.
2.2
• Never expose cooling units to temperatures exceeding +70 °C
during storage.
• Store cooling unit only in condition of usage.
Failure to observe these instructions will render the warranty
provisions null and void.
2.3
• Prior to and during unpacking make a visual inspection of the
cooling unit to see whether any damage has occurred during
transport. Especially pay attention to loose parts, dents, scrat
ches, visible loss of oil etc.
Any damage must be reported immediately to the forwarding
................ 16
agent (follow the instructions in "Rules for Damage Claims").
Moreover, the latest edition of the "General Conditions for Sup
plies and Services" issued by the ZVEI ( Central Association
for the German Electrotechnical Industry") shall apply.
• Before disposing of packing material ensure that it does not
contain any loose components.
In case of a warranty claim exact details on the fault (photograph,
if possible) and the indication of type and serial number of the
cooling unit are required.
Hazard!
If the measures described in the following are not strictly
observed there is danger to life and health.
Hazard!
If the measures described in the following are not strictly
observed there is danger to life and health due to electri
cal shock.
Caution!
If the measures described in the following are not strictly
observed material damage may be caused.

Transport

Storage

Unpacking

Danger!
Burr caused by production may be present on the metal
edges of the unit. Always wear protective gloves when
carrying out maintenance work and installation.
085 408 065f