Special Functions - Gemini GEM-P400 Manul De Operacion

A
By pressing followed by the the appropriate key, (do not press simultaneously) these special functions and features
can be enabled:
 
Easy Arm (when system is disarmed)
The Easy Arm feature allows the system to be armed by
pressing followed by
arming of the system by someone who is not a regular
system user.
 
Easy Exit (when system is armed)
This function (if programmed) allows an occupant to leave
the premises without disarming the system. Pressing
followed by while the system is armed will

start a 3 minute period, during which you can leave through
the Exit/ Entry door.
Bell / Battery Test
Pressing followed by
siren to sound for 2 seconds. This will also initiate a test of

your battery to make sure it is adequately charged. The
P400 also performs an automatic battery test very 24 hours
Access Output
If programmed, pressing
activate the Access Output which may be configured to
open a door strike, turn on lighting, or activate some other
special feature your installer has provided.
10
Oi230a
page 10
Display System Trouble
. This will allow the easy
Chime Mode On / Off
Program Mode
will cause the bell, or
Keypad Sounder On / Off
followed by will

Special Functions



Pressing followed by
is lit will cause the system to display any current system

troubles. Pressing will exit the Display System
Trouble Mode.
Pressing followed by
 
the door chime. Activating this feature will cause any door to
beep the keypad sounder when it is opened.

Pressing followed by
 
Mode", which will allow you to program and erase user codes.
(see Programming user codes, page 14)
Pressing followed by
the keypad sounder, depending on its present state. By
deactivating the sounder on a keypad installed in a bedroom,
for example, you will only turn off that keypad's sounder.
All other keypads on the system will still sound normally.
 
when TROUBLE
will activate / deactivate
will enable the "Program
will deactivate / activate
Tuesday, September 16, 1997 08:26