5. Close the back cover.
Charge the battery
Your battery has been partially charged at the factory. If the
device indicates a low charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger to the device.
3. When the device indicates a full charge, disconnect the
charger from the device, then from the wall outlet.
You do not need to charge the battery for a specific length of
time, and you can use the device while it is charging. If the
battery is completely discharged, it may take several minutes
before the charging indicator appears on the display or
before any calls can be made.
10
Tip: If you have old compatible Nokia chargers, you can
use them with the Nokia E75 by attaching the CA-44
charger adapter to the old charger. The adapter is
available as a separate enhancement.
USB charging
You can use USB charging when a wall outlet is not available.
When charging your device with the USB cable, the charging
time is longer.
With USB charging, you can also transfer data with USB cable
while charging the device.
1. Connect a compatible USB device to your device using a
compatible USB cable.
Depending on the type of the device that is used for
charging, it may take a while for charging to start.
2. If the device is switched on, select the desired USB mode.
Insert the memory card
Use a memory card to save the memory on your device. You
can also back up information from your device to the memory
card.
Use only compatible microSD cards approved by Nokia for use
with this device. Nokia uses approved industry standards for
memory cards, but some brands may not be fully compatible
with this device. Incompatible cards may damage the card
and the device and corrupt data stored on the card.
© 2009 Nokia. All rights reserved.