Idiomas disponibles
Idiomas disponibles
AXIS A1001 Network Door Controller
If you do not know the IP address, use AXIS IP Utility to locate the product on the
network. For information about how to discover and assign an IP address, see Assign
an IP Address on page 38. This information is also available from the support pages
at axis.com/support
3. Enter your username and password. If this is the first time the product is accessed, the
root password must first be configured.
4. AXIS Entry Manager opens in your browser. The start page is called the Overview page.
How to access the product from the internet
A network router allows products on a private network (LAN) to share a single connection to the
internet. This is done by forwarding network traffic from the private network to the internet.
Most routers are pre-configured to stop attempts to access the private network (LAN) from the
public network (internet).
If the Axis product is located on an intranet (LAN) and you want to make it available from the
other (WAN) side of a NAT (Network Address Translator) router, turn on NAT traversal. With
NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router is
forwarded to the product.
How to turn on the NAT-traversal feature
•
Go to Setup > Additional Controller Configuration > System Options > Network >
TCP/IP > Advanced.
•
Click Enable.
•
Manually configure your NAT router to allow access from the internet.
See also AXIS Internet Dynamic DNS Service at www.axiscam.net
Note
• In this context, a "router" refers to any network routing device such as a NAT router,
network router, internet gateway, broadband router, broadband sharing device, or a
software such as a firewall.
• For NAT traversal to work, NAT traversal must be supported by the router. The router
must also support UPnP
Assign an IP Address
About default IP addresses
Axis devices are designed to be used on an Ethernet network. To access the device's webpage you
need an IP address. Most networks have a DHCP server that automatically assigns IP addresses
to connected devices.
If your network does not have a DHCP server the default IP address is 192.168.0.90.
®
.
38
Capítulos
