Operating Conditions; Power Consumption - Axis Communications A1001 Manual De Instalación

AXIS A1001 Network Door Controller
Buttons and Other Hardware
Tampering Alarm Pin Header
Two 2-pin headers for disconnecting the front and back tampering alarms. For specifications,
see page 27.
Control Button
The control button is used for:
• Resetting the product to factory default settings. See page 45.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Specifications

Operating Conditions

The Axis product is intended for indoor use.
Classification
IEC 60721-4-3 Class 3K3,
3M3

Power Consumption

NO TICE TICE
NO NO TICE
Use a Safety Extra Low Voltage (SELV) compliant limited power source (LPS) with either a
rated output power limited to≤100 W or a rated output current limited to ≤5 A.
Power supply
Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 3,
44–57 V DC
10–30 V DC, max 26 W
Power Output Conversion (W to A)
If the device connecting to the Axis product only has an ampere (A) rating, the following method
can be used for conversion to watts (W).
The total maximum output load of the Axis product depends on the power source:
Temperature
0 °C to 50 °C
(32 °F to 122 °F)
20
Humidity
20–85% RH (non-condensing)
Maximum load on outputs
7.5 W
14 W