Stadiametric Rangefinder - Pulsar Helion XQ19F Manual Del Usuario

- the maximum duration of a recorded file is seven minutes. After this
time expires a video is recorded into a new file. The number of
recorded files is limited by the capacity of unit's internal memory.
- regularly check the free capacity of the internal memory, move
recorded footage to other storage media to free up space on the
internal memory card;
- graphic data (status bar, icons and other) are not shown in recorded
video/photo files.
IMPORTANT!
To playback video files recorded by thermal imaging devices on iOS-
based computers, we recommend that you use VLC video player or
Elmedia player.
Download links and QR codes are shown below:
VLC VIDEO PLAYER
http://www.videolan.org/
vlc/download-macosx.html
15
WI-FI FUNCTION
Your thermal imager features wireless connection option (Wi-Fi) which
links it with external appliances (PC, laptop, smartphone).
Turn on the wireless module the with a long press of the UP (10)
button. Wi-Fi operation is shown in the status bar as follows:
Connection status
Wi-Fi is off
Wi-Fi activated by the user,
Wi-Fi in the device is being
activated
Wi-Fi is on, no connection with
device
Wi-Fi is on, device connected
Your device is detected by an external device as HELION_XXXX»,
where XXXX – is the last four digits of device's serial number».
After a password is generated on an external appliance (please refer
to the menu option "Wi-Fi setup" of the section "Main menu
functions" of this user manual) and connection is established, the
icon in the status bar changes to
signal to the display of external device starts automatically.
19
ELMEDIA VIDEO PLAYER
https://itunes.apple.com/us/
app/elmedia-multiformat-video/
id937759555?mt=12
Status bar indication
icon
icon
icon
icon
; transmission of the video
16

STADIAMETRIC RANGEFINDER

Thermal imagers are equipped with a stadiametric rangefinder which
allows the user to estimate approximate distance to an object of known
size.
Select the "Stadiametric rangefinder" function with a short press of
the M (9) button and select icon
You will see on the display: measurement bars, icons of three
reference objects and respective distances for the three objects.
There are three pre-set reference
objects:
- Hare – height 0.3 m
- Wild boar – height 0.7 m
- Deer – height 1.7 m
Move the lower fixed bar under the object being ranged and, while
pressing the UP/ DOWN buttons, move the upper horizontal bar
relative to the lower fixed bar until the object fits entirely between the
two cursors. The distance to the object is automatically recalculated
as you move the upper line.
If ranging does not take place within 10 seconds, the information
disappears from the display.
To select the unit of measurement (metres or yards), go to the
respective menu option.
Before it appears on the display, a measured distance value is
rounded up to 5 m for larger values, and rounded down to 1 m for
smaller values.
Exit rangefinder mode with a short press of the M button or wait 10
seconds to exit automatically.
17
FUNCTION DISPLAY OFF
The DISPLAY OFF function activates stand-by mode which allows the
device to be quickly powered on.
Operating scenarios for the «Display off» function
Scenario 1. Device is turned off. Turn the device on and activate
«Display off».
Turn on the device on with a short press of the ON button.
Activate «Display off» with a long press of the ON button. Message
"Display off" with countdown appears.
Release the ON button.
.
160m
66m
28m
00:03
Display off
20