Personnel, Equipment And Tool Requirements - Honeywell Miller SkyORB Manual De Instrucciones Para El Usuario

4.2 Personnel, Equipment and Tool Requirements

Set-up requires one forklift operator and one additional worker to perform steps in tandem with the forklift operator. The following equipment
and tools are required:
Fig. 5a
Fig. 5c - Fork Requirements for
Compatibility with SkyORB
Base Forklift Pockets
2-3/4" (70mm) MAXIMUM FORK THICKNESS
4'-7" (1,4m) MAXIMUM FORK INSERTION
TOUCH BOTTOM OF FORK
TO TOP OF LOWER PLATE
Us e r I nst r uct i o n s - E ng l i sh
Forklift with 15 ft.-7 in. (4.75m) vertical reach (see additional forklift requirements below)
1-1/8" (28.575mm) ratcheting socket wrench or impact wrench
Torque wrench capable of reaching 100 ft.-lbs. for 1-1/8" hex heads and 3/4" hex heads
Forklift Requirements
(4.75m)
MINIMUM
LIFT HEIGHT
TOUCH TIP OF FORK
TO BOTTOM OF UPPER PLATE
To open crate
#2 Square Driver
To set up system
1-1/8" (28.575mm) wrench
3/4" (19mm) wrench
Fig. 5b
30" (762mm)
MAXIMUM WIDTH
10
60" (1.524m)
FORK LENGTH
42" (1.07m)
FORK LENGTH
7" (178mm)
MAXIMUM FORK WIDTH
17" (432mm)
MINIMUM WIDTH