Wheel Mounting - TECO 40 TOP Manual De Uso

9.6. WHEEL MOUNTING

RISK OF EXPLOSION. Always check that the tyre/rim combination is correct in
terms of compatibility (tubeless tyre on tubeless rim, tyre type with inner tube
on rim for inner tube) and geometric dimension (shrinkage diameter, width cross
section, off-set and shoulder profile) before mounting.
AVOID THE RISK OF PERSONAL INJURIES OR DEATH.
Also check that the rims are not deformed, that their fastening holes have not
become oval, that they are not encrusted or rusted and that they have no sharp
burrs on the valve holes.
Check that the tyre is in good condition with no signs of damage.
9.6.a. Tyre preparation
- Grease both the tyre (Fig. 32) beads.
- Place the tyre on the rim (Fig. 32a)
9.6.b. Head positioning
- Operate pedal
working position (Fig. 32a).
The tool is already in the correct position for mounting the tyre, unless the type
of rim has been changed.
User's manual
DANGER
to move the head into its
NOTICE
32a
EN
32
32b
109