MODUS OPERANDI
take to sweep to the Sustain level set in the Filter Envelope. Please note that this will only have an audible ef-
fect on sounds which use the Filter Envelope in some way.
•
Amp Envelope (SHIFT+Resonance)
Hold down the SHIFT button and turn the Resonance knob to adjust the Decay and Release of the Amp En-
velope simultaneously. The higher the value you choose here, the longer each note will take to decay to the
sustain level and fade to silence once you release the key.
Edit Menu Buttons
In the upper row of buttons, you will find all the menus for editing the currently selected patch, whilst the
lower row contains the navigation buttons and 'administration' menus for patch management and system
configuration.
To enter any of the Edit menus, press the EDIT/SHIFT button, followed by the relevant menu button.
Once within a menu, use the Value 1, 2 and 3 knobs to adjust the values. If you wish to make incremental
changes to a value, you can use the VALUE -/+ keys. You can use the PARAMETERS </> keys to select the
parameter you wish to edit, or just twist the Value knob underneath it.
To choose another edit menu, you need only press the relevent menu button - it is not necessary to press
EDIT/SHIFT again.
To return to the main play page again, press MODE/EXIT.
Easy / Expert Edit Mode
As the Virus TI Snow has so many parameters in the sound-engine, we have provided an Easy edit mode
(default) which only displays 3 parameters per edit menu, carefully selected to make an immediate difference
to the current patch. These parameters are selected dynamically, meaning they may change depending on
certain factors, such as the current oscillator model, for instance.
If you wish to adjust parameters other than those presented in Easy edit mode, you can switch the Virus
into Expert edit mode. To make a temporary switch within a specific edit menu, simply hold EDIT/SHIFT
while you tap the relevant edit menu key. Once you exit that particular menu, the Virus will return to Easy edit
mode.
If you want to switch to Expert edit mode permanently, then you can do this in the Edit CONFIG Menu (Sys-
tem > Edit-Mode).