Basic Operation; Power On/Off; Connect It To Your Other Equipment - Access Virus TI Snow Guía De Iniciación Rápida

BASIC OPERATION

Basic Operation
The following is intended as a walkthrough guide to show you how simple it is to use the Virus TI Snow.
Please read through it carefully, with the Virus in front of you.

Power On/Off

Plug the supplied power adaptor into to the mains, and connect it to the 12V DC IN socket on the rear of
the Virus TI Snow. The first time you do this, the unit should power up straight away*. press the EDIT/SHIFT
and PART keys together for 3 seconds to put the Virus into standby. Press the same two keys again to
power it back on.
*If you unplug the mains when the Virus is in standby, it will still be in standby when you reconnect it.

Connect it to your other equipment

• USB
Important: You must install the TI Software and drivers before connecting the Virus to your computer via
USB.
To install: Go to www.access-music.de and download the latest build of the Virus TI Snow installer package
for your chosen computer platform.
Once downloaded, extract the archive and run the installer. Follow the onscreen instructions carefully, and
connect the USB cable when told to do so.
Connect the USB port on the Virus to a dedicated port on your computer using the cable provided or one
similar. DO NOT USE A HUB! Sorry to have to shout, but the importance of this cannot be overstated - the
Virus needs a USB port all of its own if the large amounts of data involved are to flow freely!
Windows Users: Once the TI Software Suite and drivers have been installed, the Updater application will
launch automatically. Please complete the firmware update proceedure to ensure that the internal OS of the
the Virus is bang up-to-date.
Mac Users: The firmware of the Virus TI Snow will be updated automatically as part of the installation proc-
ess.