Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Anj/net + Menu
The Anynet + menu changes depending
on the type and status of the Anynet + devices connected
to the TV.
Anynet + Menu
Description
View TV
Switches from Anynet + to TV broadcast mode.
Record
Starts a recording. (This menu works only for a device supporting recording.)
(Device_Name) Menu
Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder's title menu appears.
(Device_Name) Operation
Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD Recorder
appears.
Connect (Device_Name)
Your TV connects to the corresponding device.
Receiver
Sound is output through the receiver (home theater). A audio stream in HDMI is one way
only from Device to TV. But there's SPDIF output in TV. So TV sound can be sent to HT.
Setup
You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for using
Anynet+.
TV Remote Control Buttons
Available
in Anynet + Mode
Device Type
Operating Status
Available Buttons
Numeric buttons
Anynet + Device
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
After switching to the device, while playing a file
A./T/4/I_/ENTER
buttons
Color buttons
EXIT button
44 (Backward search)
_ (Forward search)
[] (Stop)
_-II (Play/Pause)
Device with built-in Tuner
After switching to the device, when you are watching
CH A/_' button
a TV program
VOL +/- button
Audio Device
When Receiver is activated
MUTE button
Anyview2
When watching TV
_'ll (Play/Pause)
_-- The Anynet + function only works when the remote control is set to TV.
;,_ The REC button works only while in the recordable
state.
;,_ You cannot control Anynet + devices using the buttons on the side of the TV. You can control Anynet + devices only
using the TV remote control.
;,_ The TV remote control may not work under certain conditions,
in this case, re-select the Anynet + device.
_,_ The Anynet + functions don't operate for the products from other manufacturers.
_-- The Anynet + functions do not work withother
manufacturers'
products.
;,_ The 44,
_.
operations
may differ depending on the device.
Recording
You can make a recording of a TV program
using a recorder.
Press the REC button.
Recording begins. (Only when the Anynet + enabled recording device is connected.)
_-- You can also record the source streams by selecting Record
after pressing the Anynet + button.
_-- The current TV program is recorded
in the Watching TV status. If you are watching
video from another device, the video from the device is recorded.
_-- Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.
Capítulos
Tabla de contenido
