Care And Cleaning - Toto TLP01701U Manual De Instalación Y Del Propietario

Clean the parts regularly to prevent the accumulation of dirt and lime-scale.
For daily cleaning, use a neutral cleaner.
Acids are necessary ingredients of cleaning materials for removing lime.
However, please pay attention to the following points when cleaning fittings:
Only use cleaning materials which are explicitly recommended for this
„
type of application.
„ Never use cleaning materials which contain hydrochloric, formic or
acetic acid, as they may cause considerable damage.
Do not use phosphoric acid as it can also cause damage.
„
Never use cleaning materials or appliances with an abrasive effect, such
„
as cleaning powders, sponges or microfiber cloths.
Please follow the cleaning material manufacturer's instructions.
„
When using spray cleaners, spray first onto a soft cloth or sponge. Never
„
spray directly onto the fittings, as drops could enter openings and gaps,
which can then cause damage.
After cleaning, rinse thoroughly with clean water to remove any cleaner
„
residue.
„ Components with damaged surfaces must be exchanged, otherwise
this can cause an injury. Damage caused by improper treatment will not
be covered by our warranty.
„ Spout and Sensor
ƒ IMPORTANT! Do not scratch the sensor when cleaning the spout
(Ill. 12).
ƒ Avoid using any cleaning materials that may scratch the spout
surface.
ƒ To safely clean the surface, wipe it using a dampened soft cloth with
diluted dishwashing detergent and dry it with another soft cloth.
If this does not adequately clean the surface, wipe the area with a
neutral detergent and wet cloth.

CARE AND CLEANING

Ill. 12
11