Klipsch Heritage El Manual Del Propietario página 6

Ocultar thumbs Ver también para Heritage:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Klipschorn: Connections are found on the input panel on the
side of the low frequency cabinet. Two of the four pairs of binding
posts are used to connect the speaker cables coming from your
amplifier. They are labeled "HF IN" + and – / "LF IN" + and –.
Both red (+) and both black (-) posts are connected with wire
jumpers. Leave these jumpers in place for conventional single
wire connection and use either pair of posts. Remove these
jumpers for optional bi-wire connection. (See Figure 5.) Replace
the side grille, removed earlier after completing all connections.
Take care to route the speaker cable through the notch in the
lower, rear corner of the grille as the speaker is slid into the cor-
ner. If the speaker cable comes from the side opposite the input
panel, route it through the notch in that grille then in front of the
tail board and onto the input panel.
Do not connect your amplifier directly to the midrange or tweeter
driver leads or to the posts labeled "Mid Out" or "HF Out" as you
may damage the speaker.
La Scala II: The two pairs of binding posts located on the rear of
the loudspeaker are used to connect the speaker cables coming
from your amplifier. These binding posts are labeled "HF IN" +
and – / "LF IN" + and –." Both red (+) and black (-) posts con-
nected with wire jumpers. Leave these jumpers in place for con-
ventional single wire connection and use either pair of posts.
Remove these jumpers for bi-wire connection. (See Figure 5.)
Cornwall III and Heresy III: The two pairs of binding posts locat-
ed on the rear of the loudspeaker and are used to connect the
speaker cables coming from your amplifier. These binding posts
are labeled "HF+", "HF-", "LF+" and "LF-" and have both red (+)
and black (-) posts connected with metal straps. Leave these
straps in place for conventional single wire connection and use
either pair of posts. Remove these straps for bi-wire connection
(See Figure 4).
WARRANTY—U.S. AND CANADA ONLY
The Warranty below is valid only for sales to consumers in the
United States or Canada.
KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free
from defects in materials and workmanship (subject to the terms
set forth below) for a period of five (5) years from the date of pur-
chase. During the Warranty period, KLIPSCH will repair or replace
(at KLIPSCH's option) this product or any defective parts (exclud-
ing electronics and amplifiers). For products that have electronics
or amplifiers, the Warranty on those parts is for a period of two
(2) years from the date of purchase.
To obtain Warranty service, please contact the KLIPSCH author-
ized dealer from which you purchased this product. If your dealer
is not equipped to perform the repair of your KLIPSCH product, it
can be returned, freight paid, to KLIPSCH for repair. Please call
KLIPSCH at 1-800-KLIPSCH for instructions. You will need to ship
this product in either its original packaging or packaging affording
an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice,
which is evidence that this product is within the Warranty period,
must be presented or included to obtain Warranty service.
This Warranty is invalid if (a) the factory-applied serial number
has been altered or removed from this product or (b) this
product was not purchased from a KLIPSCH authorized deal-
er. You may call 1-800-KLIPSCH to confirm that you have an
unaltered serial number and/or you purchased from a KLIP-
SCH authorized dealer.
This Warranty is only valid for the original purchaser and will
automatically terminate prior to expiration if this product is
sold or otherwise transferred to another party.
This Warranty does not cover cosmetic damage or damage
due to misuse, abuse, negligence, acts of God, accident,
commercial use or modification of, or to any part of, the prod-
uct. This Warranty does not cover damage due to improper
operation, maintenance or installation, or attempted repair by
anyone other than KLIPSCH or a KLIPSCH dealer which is
authorized to do KLIPSCH warranty work. Any unauthorized
repairs will void this Warranty. This Warranty does not cover
product sold AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS
WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CON-
SUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WAR-
RANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS
AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT
NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PRACTICAL PURPOSE.
Some states do not allow the exclusion or limitation of inci-
dental or consequential damages or implied warranties so the
above exclusions may not apply to you. This Warranty gives
you specific legal rights, and you may have other rights,
which vary from state to state.
WARRANTY OUTSIDE THE UNITED STATES AND CANADA
The Warranty on this product if it is sold to a consumer outside
of the United States or Canada shall comply with applicable law
and shall be the sole responsibility of the distributor that
plied this product. To obtain any applicable warranty service,
please contact the dealer from which you purchased this prod-
uct, or the distributor that supplied this product.
sup-
Tabla de contenido
loading

Tabla de contenido