ESAB LAF 1250 BR Manual De Instrucciones página 20

Note: Cleaning and maintenance must be intensified when operating in
environment contaminated with dust, soot, or other pollutant which can damage
or harm LAF 1250 BR performance.
After cleaning, check the electrical connections and components tightness.
Check for possible cracks in electrical cable and wire insulation and other
insulation and replace them in case they are defective.
If the equipment is used in conditions different from the specified or if there is lack
of refrigeration, which can cause overheating, the circuits will be disabled and
welding will be interrupted. The system returns operation only after
reestablishing normal temperature and refrigeration.
7.2) Repairing
1 - ESAB S.A. shall not be responsible for any damage caused by wire feeders,
welding device or any other accessories used without our previous consent.
2- In case of doubts about operation and maintenance of this or other ESAB
product, contact Technical Services Department or an ESAB Authorised
Service. Refer to last page of this manual for addresses.
Turn off the energy supply of the feeding line of the switch or circuit breaker
before proceeding to any inspection or work in the equipment.
Do not allow non-qualified people to work or mend the equipment. To assure
optimal performance of the equipment, use only original replacement parts
supplied by ESAB S.A. or with its approval. The use of non original or not
approved parts will cancel warranty. Replacement parts can be purchased at
Authorised Companies or sales branches indicated at the last page of this
manual. Make sure you have the machine serial number.
20
LAF 1250 BR
I M P O R T A N T !
I M P O R T A N T !