Casio CGP-700 Guia Del Usuario página 48

■ MIXER Screen
Use this screen to change the tone of each part, and to adjust its volume and reverb.
Level meter
Item
Part
Tone
Volume
Pan
Coarse Tune
Fine Tune
Bend Range
Reverb Send
Chorus Send
Delay Send
Port
A part that is turned on is sounded. Turn off parts you do not want to sound. Off, On
Changes the tone.
Adjusts the volume. The volume level of each part is shown by an on-screen
level meter.
Specifies the stereo pan position of the sound output by the Digital Piano. 0
indicates the center, while a smaller values shifts to the left and a larger value
shifts to the right.
Specifies, in semitone steps, the pitch of the notes of each part.
Specifies, in cent steps, the pitch of the notes of each part.
Adjusts, in semitone steps, the bend range of each part.
Specifies how much reverb is applied to each part.
No reverb is applied at all when this setting is 0, while maximum reverb is
applied when it is 127.
Specifies how much chorus is applied to each part.
No chorus is applied at all when this setting is 0, while maximum chorus is
applied when it is 127.
Specifies how much delay is applied to each part.
No delay is applied at all when this setting is 0, while maximum delay is
applied when it is 127.
Specifies the port. For information about MIDI channels assigned to each
port, see "Part and MIDI Channel Assignments" (page A-17).
Meaning
Configuring Digital Piano Settings
Setting
550
0 to 127
–64 to 0 to +63
–24 to 0 to +24
–99 to 0 to +99
0 to 24
0 to 127
0 to 127
0 to 127
Port A, Port B,
Port C
EN-47