How To Use - HoMedics UHE-CM15 Manual De Instrucciones E Información De Garantía

Unique Features and Specifications
Ultrasonic Technology
This humidifier uses ultrasonic high frequency technology to convert the water into 1-5 million
super particles that are dispersed into the air evenly.
Wick
Includes 1 wick
120V AC Adaptor Included
Perfect for use at Home, in the Office, or On-The Go
Voltage Tank Capacity
5V DC 650mL – 1.4 Pints

How to Use

Mist Spout
Humidifier
Top
Lock/Unlock
Water
Reservoir
Power
ON/OFF
Button
Spring Loaded
Wick
Fig. 1
Power ON/OFF Button
Insert single pin plug into base of humidifier, then plug unit in to a 120 volt AC electrical outlet.
Push the POWER Button once to turn unit on. Push POWER
Fig. 2
Button again to turn the unit off.
6
How to Fill
CAUTION: Before filling with water, turn power off and unplug.
1. To remove the mist spout, turn it to the right until the icons align
in the "unlock" position. Lift up to remove the mist spout and
set it aside. (See Fig. 3)
2. NOTE: For first time use and with each new wick, you must
soak the wick before operating. Unlock the spring loaded wick
by turning the wick holder to the left. Remove the wick from the
wick holder and soak the wick in water for 2 minutes. Return the
wick to the wick holder and secure to the humidifier top cover
by turning to the right. (See Fig. 4)
CAUTION: DO NOT operate the humidifier without first soaking
the wick. The humidifier WILL NOT function without a wick or if
the wick is dry.
3. Fill the water tank with clean, cool (not cold) tap water to the
MAX FILL line. DO NOT OVERFILL. We recommend using
distilled water if you live in a hard water area. (See Fig. 5)
4. Place the mist spout back on the unit, making sure the icons
align in the "unlock" position. Lock into place by turning the
mist spout to the left until the icons are aligned in the "lock"
position. (See Fig. 6A & 6B)
NOTE: Be sure to wipe away any excess water from the top of
the tank before replacing the mist spout.
5. Plug adaptor into standard wall outlet.
6. To turn on, press the POWER Button. The POWER
will illuminate when the humidifier is ON.
NOTE: This humidifier does not include an Auto Shut-off when
the unit runs out of water. The unit MUST be unplugged when
not in use. Refill or turn off before the tank runs dry. Never leave
humidifier on if you will be away for more than 6 hours.
Unlock
Button
7
Fig. 3
Lock
Fig. 4
Fig. 5
Fig. 6A
Fig. 6B