Idiomas disponibles
Idiomas disponibles
• This product is a non-professional appliance designed to provide
soothing massage to worn muscles. DO NOT use this product as a
substitute for medical attention.
• DO NOT use this product before bed. The massage has a stimu-
Caution:
lating effect and can delay sleep.
Never use the
• NEVER use this product while in bed.
heat feature
• This product should NEVER be used by any individual suffering
from any physical ailment that would limit the user's capacity to
without the
operate the controls.
proper
• This unit should not be used by children or invalids without adult
attachment.
supervision.
• Use of this product should be pleasant and comfortable. Should
pain or discomfort result, discontinue use and consult your
physician.
Instructions for Use
To reduce the risk of electric shock, this appliance has a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install the proper outlet. DO NOT
change the plug in any way.
1. This unit is powered by and comes with a UL-approved cord. Untie cord
strap, extend cord and insert plug into 120-volt household
electrical outlet to power unit.
2. To turn unit on, press POWER button located above handle.
A corresponding LED light will illuminate to indicate all selections. (See
Figure 1).
Figure 1
3. Choose the desired massage option: steady or program.
4. For steady massage, press MASSAGE button. To increase or decrease
the massage intensity level, press the up or down arrows on each side of
the MASSAGE button. The intensity level is indicated by the LED screen
above the MASSAGE button.
5. For a programmed massage, press the PROGRAM button on the upper
left side. Choose any of the three program options:
• P1 provides slow, steady percussion action to relax and revitalize.
• P2 provides intense massage action to penetrate and soothe.
• P3 provides short, quick bursts for energizing stimulation.
Figure 2
Speed level may be chosen by pressing the SPEED button on
the top of the control panel. There are three speed options: L (low),
M (moderate) and H (high).
6. Gently apply massage heads to the area you wish to treat, and move
slowly in a circular motion.
4
7. Treat the target area for a short period of time, and then move to
another area. NEVER treat the same area longer than 3 minutes.
CAUTION: As stated in the "IMPORTANT SAFEGUARDS" section of
this manual, NEVER use this appliance on or near the eyes, temples
or other highly sensitive areas.
8. A massage session of longer than 15 minutes is not
recommended.
9. When treatment is completed, turn the unit off and unplug the
power supply. Store the unit properly in a cool, dry place.
NOTE: For added protection of your unit, your massager will
automatically shut off after 15 minutes
Auto-Spacing Features
The spacing between the massage heads can be adjusted to fit various
body frames and areas (See Figure 2). Turn the unit on and simply
push the button on the underside of the massager to adjust the spacing
Button
between the massage heads (See Figure 3). They will continue to cycle
in and out as a long as the button is held down. As soon as you find
your desired spacing for maximum comfort, release the button.
Figure 3
To Change Attachments
Your massager comes with 6 custom massage head attachments. Each
set is a different firmness:
• Hard (light grey)
• Soft (black)
• Heat (red)
To remove the massage heads from the unit, rotate each counterclockwise.
Figure 4
Rotate clockwise to fasten the massage heads. (See Figure 4.)
• Medium (medium grey)
• Acu-point (white)
• Gel (blue)
Figure 5
5
