Philips Hydraprotect Salon 2000 Manual Del Usuario página 12

ENGLISH
12
Troubleshooting
If problems should arise with your dryer and you are unable to
solve them by means of the troubleshooting guide below, please
contact the nearest Philips service centre or the Philips Customer
Care Centre in your country.
Problem
The appliance does not work at all
Solution
Perhaps the socket to which the
appliance has been connected is not
live:
Make sure the socket is live.
The appliance may have overheated
and switched itself off:
Unplug the appliance and let it cool
down for a few minutes. Before you
switch the appliance on again, check
the grilles to make sure they are not
blocked by fluff, hair, etc.
The appliance may not be suitable for
the voltage to which it has been
connected:
Make sure that the voltage indicated
on the type plate of the appliance
corresponds to the local mains
voltage.
The mains cord of the appliance may
be damaged:
If the mains cord is damaged, it must
always be replaced by a service centre
authorised by Philips.