Technical Data; Impact Wrench - Hilti SID 4-­A22 Manual De Instrucciones Original

3.4 Items supplied
Impact screwdriver, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
4

Technical data

4.1

Impact wrench

Rated voltage
Weight in accordance with EPTA procedure 01/2003
Rated speed under no load
Impact speed
Torque adjustment
Large standard bolts
Large high-strength bolts
Socket/bit drive
4.2 Noise and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound (power) level (L
WA
Uncertainty for the sound power level (K
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration
Vibration emission value when tightening screws/bolts and nuts of the
maximum permitted size (a
Uncertainty for tightening screws/bolts and nuts of the maximum permit-
ted size
4.3 Battery
Battery operating voltage
Ambient temperature
Storage temperature
16 English
Printed: 18.05.2018 | Doc-Nr: PUB / 5293888 / 000 / 03
)
)
WA
)
pA
)
pA
)
h
21.6 V
1.5 kg
Setting I 0 /min ... 1,000 /min
Setting II 0 /min ... 1,500 /min
Setting III 0 /min ... 2,700 /min
≤ 3,500 bpm
3 settings
M8 to M16
M6 to M12
/ " hex. socket with locking ring
1
4
98 dB(A)
3 dB(A)
87 dB(A)
3 dB(A)
12 m/s²
1.5 m/s²
21.6 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
2145524
*2145524*