Setup Instructions; Pump Installation - Polygroup SUMMER WAVES RX600 Manual Del Usuario

Before assembly, take a few minutes to identify and become familiar with all the parts.
WARNING:
CLIMBING HAZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTER CANISTER TO GAIN ACCESS TO THE POOL.
Suction & Return Fittings Installation
1. Set up your pool following the pool Owner's Manual instructions. Do NOT
fill water until the Filter Pump is properly installed. Locate the Outlet and
Inlet openings on the pool wall.
Inlet
Outlet
3. From inside the pool, install the Return Fitting 6 into the Inlet opening.
Inside Pool Wall
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.
10

SETUP INSTRUCTIONS

Outside Pool Wall
Extended operating days and hours during peak season requirements.
2. From inside the pool, install the Suction Fitting 2 into the Outlet opening.
Outside Pool Wall
4

Pump Installation

4. Take out the Filter Pump Assembly
Clamps 10 .
10
11
2
1
3
Inside Pool Wall
, two Hoses and four Hose
11 9
9
10