Cleaning, Care & Maintenance - Buffalo DM868 Manual De Instrucciones

Telephone Helpline: 0845 146 2887
Thermal Protection Reset Button
The Buffalo Sous Vide is fitted with thermal protection device to protect the unit from damage due to
overheating, low water etc. The button is located on the front of the unit under the plastic cover. If unit
overheats, allow to cool then reset by removing the cover and pressing the button.
Cleaning, Care & Maintenance
Disconnect from power by removing the plug, allow to cool before wiping exterior surfaces and
removing any loose debris.
The metal cover protecting the heating element and the water circulating device can be removed
for cleaning using the Hex key supplied. Remove the 4 Hex headed screws positioned on the
back of the unit and the 4 hex headed screws underneath the bottom of the unit. Clean using a wet
cloth.
Reattach the back cover after cleaning.
Note: DO NOT use the Sous Vide without the back cover in place
Unit should be regularly descaled using a food safe descaler
Reset Button Cover
Reset Button
Hex Screw position
on rear and underside
of unit
5
UK