Setting Up Your Tv; Installing Remote Control Batteries; Connecting Your Tv To A Power Outlet - Insignia NS-LCD37-09 Guia Del Usuario

Insignia NS-LCD37-09 37" LCD TV
# Button
16 PICTURE
17 SLEEP
18 DISPLAY
19 TV
20 HDMI
21
RECALL
22
CH
23
CH
24 EXIT
25 MTS/SAP
26 CCD
27 FREEZE
28 AUDIO
Using the remote control
To use the remote control:
• Point the remote control towards the remote
sensor on the front of your TV.
Notes
• Do not expose the remote control to shock or
liquids.
• Do not use the remote control in an area with
high humidity.
• Do not place the remote control in direct
sunlight.
• Do not place objects, such as furniture,
between the remote control and the remote
sensor.
• The remote control may not work if direct
sunlight or bright light shines on the remote
sensor. Either move your TV or change the
angle at which you use the remote control.
Description
Press to select the Brightness and
Contrast setting. You can adjust
the brightness and contrast
without opening the on-screen
menu.
Press to set the sleep timer. For
more information, see "Setting the
sleep timer" on page 9.
Press to display status
information.
Press to select the ATSC (digital),
or NTSC (analog) TV source.
Press to select the HDMI mode.
Press to watch the previous
channel.
Press to tune to the next higher
channel in the channel list.
Press to tune to the next lower
channel in the channel list.
Press to close the on-screen
menu.
Press to select one of the preset
audio modes.
In analog TV mode, you can select
MONO, STEREO, or SAP
(secondary audio program).
In digital TV (DTV) mode, you can
select the audio language, if more
than one language is available.
Press to turn closed captions on
and off. For more information, see
"Viewing closed captions" on page
9.
Press to freeze the video image.
Press again to unfreeze the image.
Do not freeze the video image for
long periods of time. You may
damage the TV screen.
Press to select the Bass or Treble
setting. You can adjust the bass or
treble without opening the
on-screen menu.
www.insignia-products.com

Setting up your TV

Installing remote control batteries

To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the
+ and – symbols on the batteries with the +
and – symbols in the battery compartment.
3 Replace the cover.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.

Connecting your TV to a power outlet

To connect your TV to a power outlet:
• Plug the power cord into a power outlet.
Notes
• Make sure that you use the correct type of
power. See the label on your TV.
• If you do not intend to use your TV for an
extended period of time, unplug the power cord
from the power outlet.
5