Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
5. "Alarm 1 (or 2) Wizard On time" is displayed and the hour digits for the alarm will flash.
6. Press
/
7. Press
/
8. Press
/
9. Press
/
10. Press the
/
minutes. Press the ENTER button to select. Press
save the alarm.
11. The display will show the current time and Alarm 1 (or Alarm 2 or at the same time)
Snooze
1. Whenever the alarm (alarm 1, alarm 2) comes on, it can be temporarily suspended for a short
period of approximately 9 minutes, by pressing the "SNOOZE" button once.
2. The alarm (alarm 1, alarm 2) will then automatically come on again after the 9-minute "snooze"
period has ended.
3. And the "snooze" symbol will show on the display to remind you that the snooze function is active.
4. To deactivate the snooze, press and release the "POWER" key once.
Sleep Timer
1. Repeatedly press the SLEEP button; you can set 90/80/70/60/50/40/30/20/10 minutes. This is
useful for falling asleep to music at night.
2. If you want to cancel the sleep mode, repeatedly press SLEEP to select OFF; the sleep mode
will cancel.
Display Backlight
You can press the DIM button to adjust the display backlight brightness. There are 3 options available:
High, Medium and Low.

DAB radio mode

Carefully extend the telescopic aerial.
Press the POWER button to turn on the unit, it will automatically go into DAB mode.
Auto Scan
1. Rotate the SOURCE knob to select "DAB MODE" (if unit not in DAB mode)
If this is the first time the unit has entered DAB Mode, it will automatically start an 'Auto
Scan' to search for available stations. (Once DAB Mode has been used before, the unit will
automatically select the previously played station)
2. Press the ENTER button to automatically start auto scan to search for available stations.
During the scanning process, the lower line of the display shows a bar graph indicating the
progress of the scan.
Manual Scan
1. Rotate the SOURCE key on the main unit to select "DAB MODE".
2. Press the [
enter the service menu.
3. Press [
strength.
4. Press MENU or [
repeatedly to set the hour. Press ENTER to confirm.
to set the minutes. Press ENTER to confirm.
to select the Alarm volume from 0 to 30. Press ENTER to confirm.
to scroll to OFF/CD/DAB/FM/USB/BUZZER status. Press ENTER to confirm.
button to scroll to the alarm duration. You can choose from 15, 30, 45 and 60
] or [
] button to select "Manual tune" and press the [ENTER] button to
] or [
] to tune in the desired channel. The graph will indicate the signal
] to exit scan.
to select YES and press ENTER to
/
- EN 7 -
Tabla de contenido
loading

Este manual también es adecuado para:

Mic255idabbtMic256idabbt

Tabla de contenido