THOMSON MIC250IDABBT Manual De Instrucciones página 27

Menu
1. Scan Setting
In FM mode, press MENU, enter the FM menu setting, then press
setting], then press ENTER to select the sensitivity setting:
1.1. All stations: ~15dB
1.2. Strong stations only: ~19dB,
2. Audio Setting
2.1. Stereo allowed:
2.2. Forced mono
2.3. System (FM system), same DAB system setting.
3. PRESET:
3.1. Preset Recall (Choose the Station):
Press ENTER to tune to the station stored in the preset memory.
3.2. Preset Recall (Choose the Station):
You may store your preferred FM stations to the preset station memories. There are 20
memory presets in your radio. Presets are remembered by your radio in the event of a
power failure.
The procedure for setting presets and using them to tune into stations is the same for
DAB modes:
In FM mode, select the desired wave band. Press [▲, ▼] to view the stored stations,
press or
ENTER to select the preset number under which you will store the station. Press ENTER
to confirm.
to tune to the required station as previously described, and then press
- EN 10 -
or to select [Scan