Changing Coolant; Clutch Backlash Adjustment; Spark Plug Inspection - Benelli BN251 Manual Usuario

CHANGING COOLANT

Change cooling fluid at the intervals
specific in the periodical maintenance
and lubrication sheet. Have the coolant
changed by an Authorised Benelli
Dealer.
IMPORTANT NOTICE:
Never try to remove the radiator cap
when the engine is hot
CLUTCH BACKLASH
ADJUSTMENT
The clutch lever backlash needs to be
10.0-15.0 mm as shown in the figure.
10.0-15.0 mm
Check the clutch lever backlash regular-
ly and adjust as necessary:
C A
101
1) Loosen the clutch ring nut "A" and the
clutch screw "C" on the cable, at the
same time.
2) To increase clutch lever backlash,
turn the clutch screw "C" clockwise
(seen from sitting on the bike).
To reduce the clutch lever backlash,
turn the clutch screw "C" anticlockwise
(seen from sitting on the bike).
3) After adjusting, tighten the clutch ring
nut "A".

SPARK PLUG INSPECTION

Since the spark plug replacement and
check may be difficult for an operator
with little experience, we recommend
contacting an authorised
workshop.
EN
Benelli