Bluetooth­mode - Grundig M 2000 BT Manual De Instrucciones

BLUETOOTH­MODE
Compatible­ with­ the­ following­
devices
Your M 2000 BT can be connected to any com-
mercially available Bluetooth-compatible de-
vices that comply with the A2DP standard. This
includes smartphones, laptops and tablet PCs,
for example.
Selecting­ the­ Bluetooth­ input­
source
1 Select the Bluetooth input source by pressing
» « on the device or »
mote control.
– Display: »BT DISCONNECT«.
Finding­ and­ connecting­ a­ Blue-
tooth­auxiliary­device
1
Activate the Bluetooth function on the Blue-
tooth auxiliary device.
2
Start the search function on the Bluetooth aux-
iliary device.
– After a short time, your M 2000 BT will be
displayed on the Bluetooth auxiliary device.
3
Select the M 2000 BT on the Bluetooth auxil-
iary device and connect to it.
4
When the Bluetooth auxiliary device is con-
nected to your device, »BT« is displayed on
the M 2000 BT.
Note:­
Your M 2000 BT can only receive and play
7
the audio signal from one Bluetooth device;
however, up to 8 Bluetooth auxiliary devices
can be logged on.
Activating­ a­ Bluetooth­ auxiliary­
device­that­is­logged­on
Notes:­
You only have to log Bluetooth auxiliary de-
7
vices on once.
When the Bluetooth auxiliary device leaves
7
and then moves back into signal range of
the M 2000 BT, the auxiliary device logs on
automatically.
32­
ENGLISH
­---------------------------------------------------------------------------------------------------
Playback­ from­ the­ Bluetooth­
auxiliary­device
1
2
AUX« on the re- 3
Logging­out­the­Bluetooth­auxiliary­
device
1
Logging­ the­ Bluetooth­ device­ back­
on
1
2
The M 2000 BT automatically connects to
7
the last Bluetooth auxiliary device that was
logged on.
If the Bluetooth auxiliary device is not recog-
7
nised, it has to be activated again via its own
menu.
Start playback on the Bluetooth auxiliary de-
vice.
Set the preferred volume with the control knob
on the hi-fi system or press
remote control
End playback on the Bluetooth auxiliary de-
vice.
Notes:­
Various functions can also be controlled on
7
the M 2000 BT.
Press » e II« to pause playback,
II« again to resume playback;
press » e
press » « to select the previous track and
» « for the next track.
Note that the data transmission range can
7
be as much as 9 m, depending on the Blue-
tooth device that is used and the structure of
the building.
Log out the Bluetooth device or press and hold
down » « on the M 2000 BT.
7
– The display changes to »BT CLEAR«.
If you move out of data transmission range or
switch off Bluetooth mode, the Bluetooth auxil-
iary device is logged out.
To log back on, select your M 2000 BT again
on the Bluetooth auxiliary device.
Note:­
If it is not possible to connect to a Bluetooth
7
auxiliary device that was registered previous-
ly, remove your M 2000 BT from the Blue-
tooth auxiliary device's device list and repeat
the search and connection procedure.
VOL­+« on the
»–