Grundig M 2000 BT Manual De Instrucciones página 26

CONNECTION­AND­PREPARATION
Connecting­the­power­cord
Notes:
Check that the mains voltage on the type
7
plate (on the bottom of the hi-fi system) cor-
responds to your local mains supply. If this is
not the case, contact your specialist dealer.
All the other devices/loudspeakers must be
7
connected before you connect the power
cord.
1­Insert the power cord into the
on the hi-fi system.
2
Plug the power cord into the wall socket.
Caution:
The hi-fi system is connected to the mains
7
with the power cord. Pull out the power plug
if you want to completely disconnect the hi-fi
system from the mains.
Make sure the power plug is easily acces-
7
sible during operation and not hindered by
other objects.
26­
ENGLISH
Activating­ the­ battery­ in­ the­ re-
mote­control
1
Changing­the­remote­control­bat-
tery
1
2
3
»AC­ ~ « socket
4
5
Pull off the film from the battery.
Undo the battery compartment screws
Pull out the battery compartment
Insert the battery (3 V, lithium, type CR 2025)
making sure that the positive terminal (+) is fac-
ing upwards.
Push in the battery compartment.
Tighten the battery compartment screws.
Notes:
Do not expose the batteries to extreme heat,
7
caused for example by direct sunlight, heat-
ers or fire.
Remove the batteries when they are flat or
7
when you know that the hi-fi system will not
be used for a long period of time. The man-
ufacturer accepts no liability for damage
caused by leaking batteries.
Environmental­note:
Batteries, including those which do not con-
7
tain heavy metal, should not be disposed
of with household waste. Always dispose
of used batteries in accordance with local
environmental regulations.
­---------------------------------------